8789 William Cody Drive
Evergreen, CO 80439
Phone: 303-670-5167
Fax: 303-670-5128

Fire Extinguisher Disconnect/Test Unit


P/N F20-26-20
  • Quick and convenient attachment to connectors.
  • Indicator lamps for visual check and binding jacks.
  • Compact size for portability.
  • Comes with carrying case.

Use with 45 V megger per
Falcon 20 Maintenance Manual


GCU Circuit Breakout Box
  • Provides capability for the functionality test of the generator voltage monitoring system.
  • Satisfies the requirements for circuit access per the Falcon 50/50EX 24-304
  • Permits easy access to GCU circuit for troubleshooting.
  • Multiple applications (21-Pin Circuit Breakout).


GCU Breakout Box
P/N F1050GCU-24182
GCU applicability Falcon 10, 20, 20-5, 200, and 50/50EX
Inquire About...


Horizontal Stabilizer Electro-Magnetic Brake Cut-Off Box


P/N F10A-274008
  • Provides for testing of amperage draw on horizontal stabilizer Normal Motor Brake per Chapter 5 requirements.
  • Designed for ease of use.
  • Compact for portability (Dimensions 5"X 3"X 2").
    Note: not applicable to the 900EX

Also applicable to the Falcon 10, 50/EX, 200, and 900


Thrust Reverser Test Box **(Falcon 20-5 Only)**
  • Provides the capability for testing and adjustment of latch and unlatch switch contacts.
  • Indicator lamps for quick visual reference and Pin Jacks for testing circuits with a multi-meter.
  • Compact design for ease of use with an internal power source.



P/N F205-7800
Applicable to the Falcon 20 Retrofit. Also applicable to the Hawker HS125-800/XP


50-Pin Breakout Box **(Falcon 20-5 Only)**
50-pin Breakout Box
P/N PCT50900-50


  • Provides access to 50-Pin ERCA modules for quick troubleshooting and testing.
  • Provides access to 15 and 25-Pin ERCA modules with optional Adapter Cable.
  • Eliminates requirements for separate breakout boxes.
  • Adaptable to multiple aircraft systems with optional adapter cables.
  • Dimensions: 7"X 9"X 2"
Applicable to the Falcon 10, 20-5, 200, 50/EX, 900 Series and 2000 Series aircraft


Landing Gear Switch Breakout Test Box
  • Provides access to LDG switches for quick and efficient resistance testing and troubleshooting
  • Usable on various electrical circuits on the Falcon 20 airframe.



P/N F20LDG-3200
Also applicable to the Falcon 200


Anti Skid Test Unit


  • Reduced manpower requirements for operation
  • Fine control of drive motor speed
  • Digital speed read-out
  • Internal protection against frozen transmitter
  • Adapts to other aircraft
  • Extra long cables
  • Compact control box measures 5" high, 10" wide, and 8" deep
  • Box may be used on the hangar floor or in the cockpit
  • Easy set-up and tear-down



P/N AS-100
Also applicable to the Falcon 10, 200, 50/EX, and 900/EX


Ground/Flight Simulator Set


  • Provides for quick and efficient diagnosis and testing of electrical circuits.
  • Permits ground/ flight simulation of individual landing gear proximity sensors.
  • Long cable permits operator to select sensor position from the cockpit.
  • Eliminates the requirement to reset faults generated from maintenance actions (Aircraft on jacks/ power on).



P/N F20GF-3200-4
Applicable to the Falcon 20/20-5, Falcon 200, Falcon 50/EX, 900 Series and 2000 Series aircraft


Return to Main Page

Falcon Test Equipment | Gulfstream Test Equipment | Hawker Test Equipment
Learjet Test Equipment
Hart Aviation Consulting, Inc.
Evergreen, CO 80439 Phone: 303-670-5167
 Contact Ray Harting at rayharting@hart-aviation.com

Copyright ©2008 All rights reserved.
Hart Aviation Consulting, Inc.