|
HAC-AE1093-1A
90-Pin Breakout Box
|
|
|
- Provides access to electrical circuits
for
required tests and checks.
- Provides access to 50-Pin ERCA modules for
quick troubleshooting and testing. See Falcon Adapter
Cable Table for appropriate test cable.
- Provides access to 15 and 25-Pin ERCA modules
with optional Adapter Cables. See Falcon Adapter Cable Table
for appropriate test cables.
- Eliminates requirements for separate breakout
boxes.
- Adaptable to multiple aircraft systems with
optional adapter cables. (See Falcon 50, 900
and 2000 aircraft reference tables)
- Dimensions: 15" X 7"X 3"
|
|
|
|
|
50 Pin Breakout
Box
|
|
|
|
- Provides
access to 50-Pin ERCA modules for quick troubleshooting and testing
(see photos *1* and *2*).
- Provides
access to 15 and 25-Pin ERCA modules with optional Adapter Cable.
- Eliminates
requirements for separate breakout boxes.
- Adaptable
to multiplpe aircraft systems with optional adapter cables.
- Dimensions:
7"X 9"X 2"
|
|
|
|
|
Landing Gear
Proximity Switch Tester
|
- Quick and
convenient attachment to connectors
- Uses
internal or external power source.
- Indicator
lamps for visual check and binding jacks for external connection to
multi-meter.
- Compact
size for portability.
|
|
|
|
|
|
|
|
Ground/Flight
Simulator Set
|
|
|
|
- Provides
for quick and efficient diagnosis and testing of electrical circuits.
- Permits
ground/ flight simulation of individual landing gear proximity sensors.
- Long
cable permits operator to select sensor position from the cockpit.
- Eliminates
the requirement to reset faults generated from maintenance actions.
(Aircraft on jacks/ power on)
- Satisfies
the equipment requirements in the Falcon 2000 MM 27-311, 27-602,
32-446, 29-100, 24-302, and other designated maintenance functions.
|
| Note: We
have added an adapter cable P/N F2000GF/50GF which adapts the
F2000-3260-27 (F2000 & 900) to the Falcon 50 aircraft |
|
|
|
|
|
- Provides
access to main electrical Box for Reverse Current Protection Circuit
and troubleshooting of PC Cards.
- Plugs
directly in to the PCB board slot.
- Provides
for quick and efficient testing of Reverse Current Circuit Per work
Card 24-313 (Operations Code 243131).
- Push to
test switch completes the circuit test in seconds.
- Eliminates
requirements for disconnecting and reconnecting of terminals on PC
Board.
- Click here for more information.
|
|
|
|
Applicable
to the Falcon 2000 only
|
|
|
|
Thrust Reverser
Latch Switch/Harness Breakout Test Box
|
|
|
|
- Provides
for quick and efficient testing, troubleshooting and adjustment of the
Thrust Reverser Latch Switches.
- Compact
design for ease of use with an external AC or internal DC power source.
- Indicator lamps for quick visual reference and
Pin Jacks for testing circuits with a multi-meter.
- Eliminates
pin-to-pin checks when rigging microswitches.
|
|
|
Applicable
to the Falcon 2000 only
|
|
|
- Leak
testing of Slat Telescopic Anti-Ice Tubes.
- Satisfies
the requirements of work cards:
- Falcon 50
Card 429.0/1
- Falcon
900 Card 30-108
- Falcon
2000 Card 30-104
- Storage
container included.
|
|
|
|
|
|
|
|
|
|
|
|
- Removal
and installation tool for the Horizontal Stabilizer Spring Loaded
Fairing.
- Equivalent
to the manufacturer's supplied tool.
- Replacement
parts are also available for worn or damaged tools currently in service.
|
|
|
|
|
|
- Designed for externally
operating/controlling the thrust reverser hydraulic valve input.
- Utilizes an external AC
power supply to control the aft equipment bay mounted servo valve.
- Connects directly to TR
servo valve L20ER/R20ER in aft equipment bay.
- This external control
Unit is ideal for cycling and bleeding the TR actuators after
replacement.
- Allows the technician the
ability to operate and observe the Thrust Reverser at the rear of the
aircraft.
|
|
|
Applicable
to the Falcon 2000 only
|
|
|
|
|
- Reduced
manpower requirements for operation
- Fine
control of drive motor speed
- Digital
speed read-out
- Internal
protection against frozen transmitter
- Adapts to
other aircraft
- Extra
long cables
- Compact
control box measures 5" high, 10" wide, and 8" deep
- Box may
be used on the hangar floor or in the cockpit
- Easy
set-up and tear-down
|
|
|
|
|
|
|
Falcon Adapter Cable
Table
Return Home
|
